Configure VPS IP address in OneProvider Server

If you are running virtualization software like Proxmox, KVM, or VMWare ESXi on the OneProvider server, you need to order an additional IP address. On one provider IP operates in 2 modes, you need to set IP to virtualization mode to configure the IP address inside a VPS.

Go to Server Details > Manage > IP Manager

Default settings for IP address is “Host Route”, change it to “Virtualization” under Routing Type.

oneprovider ip manager

On this page, you can also get the Gateway IP address. All virtual machines should use the same Gateway IP as main server.

For a virtual machine, I used following netplan config

root@vm3:~# cat /etc/netplan/00-installer-config.yaml 
# This is the network config written by 'subiquity'
network:
  ethernets:
    enp1s0:
      dhcp4: false
      addresses:
      - 5.104.107.115/32
      nameservers:
       addresses:
       - 1.1.1.1
       - 8.8.8.8
      routes:
      - on-link: true
        to: 0.0.0.0/0
        via: 89.163.146.1
  version: 2
root@vm3:~#

root@vm3:~# cat /etc/netplan/00-installer-config.yaml

# This is the network config written by 'subiquity'

network:

ethernets:

enp1s0:

dhcp4: false

addresses:

- 5.104.107.115/32

nameservers:

addresses:

- 1.1.1.1

- 8.8.8.8

routes:

- on-link: true

to: 0.0.0.0/0

via: 89.163.146.1

version: 2

root@vm3:~#

Here 5.104.107.115 is the IP address of the Virtual Machine. 89.163.146.1 is the gateway.

After editing file /etc/netplan/00-installer-config.yaml, you can apply the changes with command

netplan apply

1	netplan apply

Leave a Reply Cancel reply